24/7 emergency service

Serving homeowners across North Carolina

(833) 752-1196

dented old door and new bronze carriage door

Garage Door Replacement Cost in NC: Installed Prices

A new garage door costs $700 to $2,700 installed, per HomeGuide 2026. HomeGuide puts a double at $1,000 to $3,500, and Angi's 2026 project data puts the national average at $1,231. A technician measures your opening and headroom, checks the county wind rating and prices the door before you order. In North Carolina, a replacement costing $40,000 or less needs no building permit.

  • No trip fee
  • Price before any work
  • 24/7 emergency service
  • Price before any work You approve the full price before a technician starts.

  • No trip fee No trip fee anywhere in our NC service area.

  • 24/7 emergency service Phones answered day and night, in every city we serve.

How much does a new garage door cost?

A new garage door costs $700 to $2,700 installed for a single door and $1,000 to $3,500 for a double, according to HomeGuide’s 2026 guide. Angi’s 2026 data from 15,434 projects puts the average at $1,231, and This Old House reports $1,400.

Three national cost guides place a standard installed garage door between $700 and $3,500, with averages of $1,231 (Angi) and $1,400 (This Old House). Each guide prices a slightly different job, so the table shows every range as published instead of blending them into one number.

National installed garage door costs published by each guide. Garage Door Guy NC publishes no prices of its own; the price for your door comes from the on-site measure and price.
PublisherYearLowHighWhat the range covers
HomeGuide2026$700$2,700Single door, installed
HomeGuide2026$1,000$3,500Double door, installed
Angi2026$754$1,707Typical project; $1,231 average from 15,434 projects
This Old House2026$1,151$1,869Standard door, installed; $1,400 average

Pricing a door for your own garage? Call (833) 752-1196 to book an on-site measure and price. The technician measures the opening and headroom and gives you the full price before you order, with no trip fee.

How much does a garage door cost for a single or 2-car garage?

A 2-car door costs roughly twice a single door: This Old House’s 2026 guide lists $1,093 to $1,674 for one-car doors and $2,186 to $3,348 for two-car doors. HomeGuide’s 2026 guide puts single doors at $700 to $2,700 installed.

Single doors come most often in 8 × 7 ft and 9 × 7 ft; a double door for a two-car garage is usually 16 × 7 ft. Door size sets the price twice over: a wider door has more section material, and its extra weight calls for larger springs and often a reinforcing strut. A three-car garage usually takes one single door plus one double.

Installed garage door cost by size, 2026 national figures. A dash means no figure for that size is cited from that guide.
DoorHomeGuide 2026 (installed)This Old House 2026Angi 2026
Single / one-car (8 × 7 or 9 × 7 ft)$700–$2,700$1,093–$1,674$500–$3,000
Double / two-car (16 × 7 ft)$1,000–$3,500$2,186–$3,348$800–$5,000 (one double door)
3-car (single + double)$1,700–$6,200$3,279–$5,022—

What does a garage door cost by material?

Steel is the least expensive material at $700 to $2,500 installed, and glass the highest at $2,500 to $6,000, according to HomeGuide’s 2026 guide. Wood runs $1,200 to $4,000 and aluminum $800 to $2,500; Angi’s 2026 ranges run wider at both ends.

Material sets the cost tier and the upkeep that follows. Steel sections are pressed sheet over a frame, and most new residential doors are steel. Composite doors are molded to look like wood without the refinishing a real wood door needs. Glass doors set panes in an aluminum frame. This Old House’s 2026 guide gives narrower bands for three materials: steel $1,093 to $1,288, aluminum $1,199 to $1,394 and wood $1,674 to $1,869.

Installed garage door cost by material, HomeGuide and Angi 2026 national figures
MaterialHomeGuide 2026 (installed)Angi 2026
Steel$700–$2,500$650–$3,200
Aluminum$800–$2,500$600–$2,900
Fiberglass$1,000–$2,100$800–$2,700
Wood$1,200–$4,000$900–$4,500
Composite (wood-look)$1,200–$2,800$650–$4,800
Glass$2,500–$6,000$2,500–$8,000

How much does an insulated garage door cost?

An insulated 1-car garage door costs $750 to $1,900 installed, against $550 to $1,300 for a non-insulated door, according to HomeGuide’s insulated-door guide (updated 2025). Angi’s 2026 guide puts insulated doors at $1,100 to $4,200 across all sizes.

An insulated door has a foam core between its skins: polystyrene boards set into the sections, or polyurethane foamed in place. The core adds cost and weight, and the heavier door is balanced with springs sized for it.

Insulated 1-car door
$750 to $1,900 installed (HomeGuide, 2025)
Non-insulated 1-car door
$550 to $1,300 installed (HomeGuide, 2025)
Insulated 2-car door
$1,500 to $3,700 or more installed (HomeGuide, 2025)
Non-insulated 2-car door
$800 to $1,800 installed (HomeGuide, 2025)

How much does a wind-rated garage door cost in coastal North Carolina?

HomeGuide’s 2026 guide puts a wind-rated single door at $1,200 to $6,000 installed and a double at $2,000 to $10,000. Carteret County and coastal parts of Brunswick, New Hanover, Onslow and Pender sit in the 150 mph zone of the 2018 NC Residential Code.

HomeGuide’s range is national and is not tied to a design pressure, so it does not say what a door for a given county costs. The county sets the design wind speed; the design wind speed sets the pressure the door has to resist; and a higher pressure adds struts and heavier hardware to the price. A wind-rated door carries the manufacturer’s label and a wind-load drawing, and the inspector checks the struts, hinges and track brackets against that drawing.

Design wind speed by North Carolina county (2018 NC Residential Code, Table R301.2(4)) and the design pressure for a 16 × 7 ft door on a single-story home (DASMA TDS 155h, Exposure B)
Wind zoneCountiesWhat the door needs
150 mphAll of Carteret; Brunswick and New Hanover east of US 17; Onslow and Pender east of the Intracoastal Waterway+16.7 / −18.6 psf, with label and wind-load drawing
140 mphCraven, Columbus, Jones, Pamlico; Brunswick and New Hanover west of US 17; Onslow between US 17 and the Intracoastal Waterway; Bladen east of US 701; Dare and Hyde east of US 264+14.5 / −16.2 psf, with label and wind-load drawing
130 mphBeaufort, Duplin, Pitt, Robeson, Sampson, Wayne and other eastern counties; Cumberland east of I-95+12.5 / −13.9 psf, with label and wind-load drawing
120 mphHarnett, Hoke, Johnston, Richmond, Scotland, Wilson; Cumberland west of I-95Label and wind-load drawing for the 120 mph zone
115 mphEvery county not listed, including Mecklenburg, Wake, Durham, Guilford and ForsythLabel and wind-load drawing for the 115 mph zone

What is included in the cost to install a garage door?

An installed price covers the door and hardware, installation labor of $200 to $500 and usually removal of the old door, according to HomeGuide’s and Angi’s 2026 guides. A new opener adds $300 to $900. North Carolina needs no permit for replacements costing $40,000 or less.

  • Door and hardware

    $400 to $2,500 for the sections, tracks, springs, rollers and brackets (HomeGuide 2026).

  • Installation labor

    $200 to $500, with an average of $350 in Angi’s 2026 data.

  • Old door removal

    $50 to $250 in HomeGuide’s 2026 guide and $50 to $200 in Angi’s, which notes it is often included.

  • New opener

    $300 to $900 when the opener is replaced with the door (HomeGuide 2026).

  • Building permit

    None in North Carolina for a replacement costing $40,000 or less (G.S. 160D-1110(c)), so the $40 to $250 in permit fees the national guides list drops off the bill. Widening the opening changes the header, which is load-bearing work and needs a permit.

  • HOA architectural approval

    No fee figure is published. North Carolina has about 14,900 community associations, fifth in the nation (Foundation for Community Association Research, 2023), and each declaration sets its own rules on door style and color, so approval comes before the order.

When does replacing a garage door cost less than repairing it?

Replacing the door wins when repairs pass 50% of a new door’s price, according to HomeGuide’s 2026 guide. HomeGuide prices one replacement panel at $300 to $1,200 or more, so two or three damaged sections on a 15-to-20-year-old door approach a single door’s installed cost.

Panel repair compared with a new single door, HomeGuide 2026 national figures
ItemHomeGuide 2026What it means for the decision
One replacement panel$300 to $1,200 or moreRepair makes sense for one damaged section on a sound door
New single door, installed$700 to $2,700Two or three damaged panels approach this figure
Door ageLifespan 15 to 30 years; replacement considered at 15 to 20An older door with damaged panels is the case for replacing

Every figure above is a national average; two North Carolina cities have their own published price ranges.

What do new garage doors cost in Charlotte and Raleigh?

Angi’s 2026 city pages put a garage door replacement at $1,192 on average in Charlotte and $1,098 in Raleigh. Both sit below Angi’s national $1,231 average. No statewide North Carolina average is published, so the other figures on this page are national.

Garage door replacement costs in North Carolina cities (Angi city pages)
CityAverageRangePage updated
Charlotte$1,192$760–$1,624Aug 4, 2026
Raleigh$1,098$723–$1,495Aug 4, 2026

Angi publishes these two North Carolina cities only. A homeowner in Concord, Greensboro or Wilmington compares the national ranges above, then gets the price for the actual opening from an on-site measure and price. To book one, request a new door quote or call (833) 752-1196.

Measuring, delivery and fitting are covered step by step on our installation page for new garage door replacement. Openers are priced separately from the door on our garage door opener installation cost page, and single-part fixes such as springs or cables are priced on our garage door repair cost.

Frequently Asked Questions

Does a new garage door need a permit in North Carolina?

No, not for a replacement costing $40,000 or less (G.S. 160D-1110(c)). Angi and HomeGuide list permit fees of $40 to $120 and $50 to $250 for places that require one. Widening the opening is structural work and needs a permit, and the new door must still meet the county wind rating.

How much more does an insulated garage door cost?

HomeGuide's insulated-door guide (updated 2025) lists $750 to $1,900 installed for an insulated 1-car door against $550 to $1,300 for a non-insulated one, and $1,500 to $3,700 or more against $800 to $1,800 for a 2-car door.

How much does a wind-rated garage door cost?

HomeGuide's 2026 hurricane-door guide puts a single wind-rated door at $1,200 to $6,000 installed and a double at $2,000 to $10,000. Every new door in North Carolina has to meet its county's design wind speed: 115 mph inland and up to 150 mph on the coast under the 2018 NC Residential Code.

How long does it take to install a new garage door?

HomeGuide's 2026 guide puts a standard garage door installation at 3 to 6 hours. That covers removing the old door, fitting the new sections, tracks and springs, and balance-testing the door. Labor is part of the installed price: $200 to $500 in HomeGuide's and Angi's 2026 guides.

How is a new garage door measured and priced?

On-site measure and price for new garage doors: a technician measures the opening and headroom, and you get the price before any work starts. There is no trip fee anywhere in our North Carolina service area.

Get your new door measured and priced at home

Call (833) 752-1196 to book an on-site measure and price. The technician measures the opening, checks your county's wind zone and gives you the full price before you order. No trip fee, and the price before any work starts.

Call now Get a Quote